EasyManua.ls Logo

Beper P201UTP010 - Device Warnings and Specifications; Disinfectant and Battery Guidelines; Product Components Overview; Charging the Device

Beper P201UTP010
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EN
Warnings
This device does not contain nor comes with disinfectant solution;
for a more efcient disinfectant action, use waterbased solutions
with alcohol content equal to or above 75%.
This device is equipped with an atomizer that nebulizes solution
particles, to disinfect hands and/or objects; do not use oily solutions
(e.g. gel, fragrance oils, etc.) to avoid the atomizer to get clogged.
Make sure that children do not play with the device, to avoid dama-
ge to their health and to device as well.
Do not use this device in the proximity of ames and/or ammable
uids.
This device is equipped with a rechargeable, non-removable lithium
battery; do not throw the device in open ames and/or ordinary wa-
ste, dispose it in the dedicated containers, according to the rules
applicable in the place of use.
Do not expose this device to extreme temperatures.
Warning: do not immerse the device in water or other li-
quids, there is a risk of re or spontaneous combustion.
High intensity ambient light can affect the correct operation of in-
frared sensor.
Description of product Fig.A
1. Operation switch
2. USB cable inlet
3. Infrared sensor
4. Atomizer
5. Main unit
6. Tank
7. Solution level checking window
8. Battery case
9. Cotton swab
Charging
Before rst use, it is advisable to fully charge the battery.
Insert the USB cable into the inlet found on the main unit of the de-
vice, and connect it to a power supply (e.g. power bank, laptop), or
to a wall plug through a USB adapter (not provided with the device).
The red LED indicator ashes during charging, and becomes stea-
dy when the charging is complete.
Once charging is over, disconnect the USB cable from the power
supply or the wall plug, and remove it from the device.