To Next PageTo Next Page
Need help?Do you have a question about the Beretta Ciao S 20 C.S.I. and is the answer not in the manual?
Covers crucial safety measures for installation, operation, and maintenance.
Explains C.S.I. and R.S.I. models and operational modes A, B, C.
Details positioning and minimum clearance requirements for installation.
Covers compliance with regulations, position, and minimum distances.
Details securing the boiler and connecting hydraulic lines.
Explains how to connect the boiler to the electrical system.
Details the procedure and requirements for connecting the gas supply.
Covers regulations and accessories for flue gas and air intake.
Lists essential checks before initial startup.
Step-by-step guide for starting the boiler for C.S.I. and R.S.I. models.
Explains the S.A.R.A. function for adaptive heating control.
Procedures for temporary and long-term boiler shutdown.
Lists and explains various status indicators and fault codes.
Procedures to reset alarms and resolve common faults.
Steps for adjusting DHW temperature for C.S.I. model.
Steps for adjusting power settings for R.S.I. model.
How to enable and perform minimum/maximum heating calibration.
Technical specifications for heating and domestic hot water output.
Specifications for power, efficiency, and combustion.
Details pressure, temperature, flow rates, and hydraulic connections.
Data on fan performance and load losses in flue gas pipes.
Details emission data (CO, NOx) and gas compatibility.
Identifies and describes the function of each control on the panel.
Explains the meaning of various icons displayed on the panel.
Lists and describes the main functional parts of the boiler.
Diagram showing the flow of water and components in the system.
Details how to connect the ambient thermostat to the boiler control.
Explains recommended electrical polarization and component connections.
Explains the data provided on the boiler's serial number plate.
Graph showing residual head versus flow rate for different pump speeds.
General