Need help?Do you have a question about the Bergen INTREPID GAS and is the answer not in the manual?
Essential safety information before assembly.
Details the product warranty terms and conditions.
Welcomes the user and provides an overview of the manual and kit.
Step-by-step guide to assembling the helicopter's landing gear.
Installation of battery trays and canopy mounting points.
Preparing the engine and attaching initial components for mounting.
Installing servos, the on/off switch, and the fuel tank system.
Connecting frame components and assembling the front transmission.
Comprehensive assembly of the main drivetrain components.
Connecting the main frame sections together.
Crucial step for ensuring smooth operation of gears.
Assembling the swashplate and washout unit for rotor control.
Assembling various control arms and bellcranks for the linkage system.
Step-by-step guide to building the main rotor head assembly.
Mounting the rotorhead and installing the flybar system.
Instructions for assembling the extended boom tail rotor system.
Instructions for assembling the standard tail rotor system.
Adjusting the tail pushrod for correct alignment and operation.
Verifying the tracking of the tail blades for proper performance.
Configuring the radio transmitter and servo wheels.
Assembling the pushrods and control linkages.
Setting up pitch curves and checking blade pitch.
Installing main rotor blades and ensuring proper grip security.
To Next Page
General