berlinger Fridge-tag 2 User Guide

Connect the device via
USB with your PC/MAC.
For more informaon download the whole
user manual from
www.berlinger.com/user-manuals.
The display indicates
the word LOC for a
period of 10 minutes
(factory preset),
during this me the
device does not
measure the tempe-
rature to avoid false
readings. Place the
device immediately to
the supervised goods.
The Fridge-tag will now generate a PDF and ASCII
report of max. 30 or 60 days (oponal factory seng).
This process can take up to 30 seconds.
Note: Disconnect the external sensor from the device
rst.
yyyd y__d
Note: Press and hold the READ buon again for at least
3 seconds and the next alarm event will appear on the
screen.
Opon 2: Read out alarms
directly on the device
Alarm-Super-Jump funcon (30-day history)
Press and hold READ
for 3 seconds.
Quick Info - User Guide
EN
The connuously
appearing arrows
in the upper display
area indicate that the
device is processing.
This process must not
be interrupted unl
the OK symbol ap-
pears on the display.
This indicates that
the creaon of the
ASCII and PDF les
has been successfully
completed.
5
5
8101 2026
loC
1 038
Back to normal operaon
Internal sensor
Please connect the device with the external sensor
again. Aer 10 minutes (factory standard) without
a connecon between the device and the external
sensor:
• The whole display starts blinking.
• Any conrmaon will stop the display from blinking.
More details see chapter “Connecon error” in the
Quick Info “Set Up Fridge-tag 2”.
Berlinger & Co. AG
Mieldorfstrasse 2
9608 Ganterschwil
Switzerland
Tel. +41 71 982 88 11
www.berlinger.com
EN_QI_UG_FT2_V1_052018
Opon 3: Read out data from the
les generated by connecng the
device with a computer
internal/external sensor
User Guide
Fridge-tag® 2
External sensor

berlinger Fridge-tag 2 Specifications

General

Brand	berlinger
Model	Fridge-tag 2
Category	Other
Language	English