EasyManua.ls Logo

Bernards ATVEL12 - Battery Charging Instructions; Charging Procedure; Charging Warnings

Bernards ATVEL12
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Keep the level of brake fluid between the min.and the max. level marks. Only the fluid DOT 4
is used.
NOTE NEVER use brake fluid ADC. Or the rubber parts in braking system will
be damaged.
INSTRUCTIONS FOR BATTERY CHARGING
FA-EA501/EA502 is with an external charger. Connect the output terminal of the charger to the
charging port of the ATV, then plug the other end of the charger in the power supply.
Insert charger output terminal to the charging port Plug in charger input terminal
Red light indicates in charging Green light indicates charging finished
Standard charging timeaccording to the requirement of special chargers with the vehicles.
Charging costs 8-10 hours under the temperature of 25.
WARNNING
1.To avoid no power or full power of the battery for a long time
2.This charger is equipped with over current protective device,charging for a long time
(generally no more than 18 hours) will not affect the life of battery and charger
3.When charging,please put in a safe place beyond children reach.
4.Dont use charger of other brands,or charge other batteries with this charger.
5.Theres high voltage circuit inside the charger, DO NOT disassemble it unauthorized.