169
Troubleshooting
Embroidery hoop attached
⦁
remove embroidery hoop
Embroidery motif is partly outside the
hoop
Embroidery motif is too large
⦁
re-position the embroidery motif. The area within the hoop
can be embroidered
⦁
reduce the motif size or attach a bigger hoop. The area within
the hoop can be embroidered
The embroidery process cannot
proceed
⦁
move Mega-Hoop to center position and resume
embroidering
Less free space on the USB stick
No personal data available on the USB
stick
During the update process personal
data was not saved on the USB stick
⦁
delete data from USB stick
⦁
check that the USB stick is inserted correctly and re-start the
sewing computer
⦁
the software was correctly updated. Personal data could not
be recovered
BERNINA USB stick is not inserted
New SW Version is not available on
the stick
Update successful
⦁
insert BERNINA USB stick and do not remove during the
update process
⦁
save the new SW Version on the BERNINA USB stick and
start the update again
⦁
the sewing-/embroidery computer has been provided with the
latest software version
General Explanation Repair
Messages
To Next Page
Loading...
Need help?
General
