Bernina 802 Sport User Manual

How to connect the power cable and foot control unit to the machine.

How to lift the bobbin case latch to remove the bobbin case.

How to start and stop the bobbin winding process.

How to hold the bobbin case and insert the bobbin correctly.

Guide the thread through the bobbin case slot and spring.

Ensure the bobbin turns correctly when pulling the thread.

How to insert the needle correctly into the clamp.

Procedure for removing the presser foot.

Guide the thread through the machine's guides and tension.

How to pull the upper thread to bring up the lower thread.

How to lower the feed-dog for specific stitches like darning.

How to adjust thread tension for special sewing tasks.

Importance of using the correct needle system (130/705H).

Guidance on purchasing the correct needle system.

How needle size relates to thread choice for optimal sewing.

How to sew forward with the machine.

How to sew in reverse to secure stitches.

How to adjust the needle position for straight stitch.

Method for securing the beginning and end of a seam.

Technique for securing thick seams.

General settings for performing a zig-zag stitch.

How to adjust the zig-zag stitch width.

Guidelines for effective over-sewing stitch settings.

Technique for over-sewing edges with the presser foot.

Method for over-sewing directly on the fabric edge.

How to set the stitch length for satin stitch.

Procedure for setting the stitch length for satin stitch.

How to adjust stitch density for different materials.

How to engage and select different practical stitches (0-7).

Settings for Universal stitch (No. 4).

Settings for Scallop stitch (No. 7).

Settings for Running stitch (No. 3).

Settings for Vari-overlock stitch (No. 6).

Applications for the Zig-zag stitch on various materials.