EN
96
10 12 15
Set the machine as illustrated.
Turn the stitch width dial and stitch length dial
to suit the fabric.
Set stitch length control between "1" - "2". Set
stitch width control between "3" - "5".
(model 15)
Shell hem (1)
Pattern selector on " ".
For decorative edges.
Suitable for edges on sheer, ne and stretch
fabrics. The larger stitch should go just over
the edge of the fabric to create the shell effect.
Rampart (2)
Pattern selector on " " .
For at joining seams, sewing on elastic, visible
hems.
This stitch can be used for rm, thicker fabrics.
Bridging (3)
Pattern selector on " ".
For seams, place mats, tablecloths. Decorative
joining seam for a fagotted effect. Gathering
with cord or shirring elastic.
Scallop stitch (4)
Pattern selector on " ".
For a delicate edge nish along the edge of
fabric.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Practical stitches
To Next Page
Loading...
