EN
64
10 12
Turn the pattern selector dial to " "or " ".
Function of stitch length dial while
zigzaging
The density of zigzag stitches increase as
the setting of stitch length dial approaches
"0". Neat zigzag stitches are usually
achieved at "2.5" or below.
Satin stitch
When the stitch length is set between
"0" - "1", the stitches are very close together
producing the "satin stitch" which is used for
making buttonholes and decorative stitches.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Zigzag stitching
To Next Page
Loading...
