Bernina BSR - Attaching the BERNINA Stitch Regulator (BSR)

7
en
Attaching the BERNINA Stitch Regulator (BSR)
> Attach the slide-on table and the knee lifter (FHS).
> Fix the BERNINA Stitch Regulator (BSR) at the sewing machi-
ne.
> Insert the plug into the provided BSR connection.
> Lower the feed dog.
> Decrease the presser foot pressure according to the type and
thickness of the fabric.
> Bring needle position in center position (0).
Caution! Injuries caused by needle movement.
Moving the fabric layers with BSR function starts the sewing
machine.
> Do not perform any tasks such as threading, changing the
needle or the like as long as the sensor of the BERNINA stitch
regulators (BSR) lights up in red.
5
4