9
THE DESCALING PROCESS IS DESCRIBED IN THE FOLLOWING ILLUSTRATION:
Close the lid and the seat.
The descaling process is then started.
During the descaling process, you can use the
toilet continue to use without shower function.
The process takes about half an hour. During this
time, the LED on the rotary knob ashes.
Once the LED stops blinking and lights up again,
and with a long „BI“ warning tone, the shower
function is restored operational.
Open the lid and the seat. Open the descaling lid.
Open the rubber cover. Fill in descaling agent.
Dosage: about 150 ml.
NOTE:
At this point
water will ow
out of the nozzle.
1
3
5
Close the descaling and rubber covers.
2
4
6
To Next Page
Loading...
