Bertini DA1756B5 - Day Bed Assembly; Starting From Crib; Starting From Scratch

WARNINGS:
*
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
*
STEP 3:
STEP 4:
Ensure all bolts are tightly secured.
DAY BED ASSEMBLY: STARTING FROM SCRATCH
Follow steps 1 to 3 of the crib assembly instruction.
Follow steps 2 to 4 for the day bed assembly instruction located above (starting from crib).
STEP 1:
STEP 2:
5 in 1 Convertible Crib
DA1756B5
DAY BED ASSEMBLY: STARTING FROM CRIB
51-5/8 INCHES (69CM by 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
The toddler bed or day bed is not intended for children under 15 months of age or over 50 lbs
(22.7 kgs).
STEP 1:
Detach the front panel (D) from side panels (B & C) with Allen key (6).
STEP 2:
and spring washers (4) from left & right side panels (B & C) and move to the lowest
Attach bottom rail (E) to the side panels (B & C) using bolts (2). Use Allen key (6) to
tighten all bolts.
4 PCS
5
16 PCS
6 PCS
4 PCS
3
2
16 PCS
4
5
6 PCS1
C
B
A
2
E
position
If mattress support (F) is not in the lowest position, unscrew mattress support bolts
(3)