Bertini DL1302B4NR - Toddler Bed & Day Bed Conversion; Assembly Starting from Crib; Assembly Starting from Scratch

WARNINGS:
*
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15CM).
*
The toddler bed or day bed is not intended for children under 15 months of age or over
50 lbs (22.7 kgs).
STEP 1: Detach the front panel (F) from the right post (B) and the left post (A) with Allen Key (5).
STEP 2: If mattress support (H) is not in the lowest position, unscrew bolts (3) from left & right
front posts (A & B) and side panels (D & E) and move to the lowest position.
STEP 3: Ensure all bolts are tightly secured.
STEP 1: Follow step 2 to 3 of the crib assembly instructions but ignore front panel (F) in step 2.
4 IN 1 CRIB
DL1302B4NR
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM CRIB
TODDLER BED & DAY BED ASSEMBLY: STARTING FROM SCRATCH
A
C
E
D
B
G
H