Bertini HILTON DA1901B5-GR - Step 2: Attach Mattress Support

STEP 2
HILTON HEAD 5 IN 1 CONVERTIBLE CRIB
DA1901B5-GR / DA1901B5-G / DA1901B5-W
Attach mattress support (F) to the side panels (B & C) with mattress support bolts (2) and
spring washers (4).
Use Allen key (3) to tighten the bolts (2).
2
NOTE: The above photos and drawings showing how to properly attach the mattress
support are for reference only. Crib styles and colors will vary.
`
2
4
3
CORRECT
"THIS SIDE UP"
label shows which
side to face
CORRECT
* Tabs on corners of
mattress support should
point up.
4