Bespoke Infinity - Page 27

27
The steps below must be carefully
followed to ensure the remote controls are
correctly programmed to the stairlift.
1 - Turn on the lift’s main switch
PRESS micro-switch 3 ONCE
2 - IMMEDIATELY Press and hold either
directional button on the remote.
LED 3 will Illuminate continuously when
programmed
3 - Further remote controls will
automatically be programmed as they are
paired with each other.
PROGRAM THE REMOTE CONTROLS
N
O
P
ON
PRESS
ONCE
LED
1
2
1
2
3
PRESS & HOLD