43
INSTALLATION TOOLS
1) 2 ft (500mm) spirit level (approx) 2) Extension Bar 3/B” or W drive)
3) Tape Measure ~ 5 metres
4) 6mm twist drill bit (15/16”)
5) 8mm masonry drill bits
6) Hexagon keys one set- Sizes: 2 -
10mm (‘T handles or long series) 7) Combination spanners, one set-
Sizes: M8 to M24
8) Crimping tool
9) Cross-head screw/drivers, one set
(variable sizes)
10) Dust sheet
11) Electric drill (Variable speed/
Hammer action / Chuck size 13m minimum)
12) Electrical or combination pliers 13) Electrical side cutters
14) Extension lead (heavy duty) 15) External circlip pliers
16) Flat blade screwdrivers, one set (variable sizes)
17) Hammer 20oz (claw or ball pen) 18) Long nose pliers
19) Magnetic angle nder
20) Digital Multi meter/Clamp meter
(must be capable of measuring DC
current at 30A for at least 5 seconds) 21) Nut runners - sizes: 5mm,
5.5mm, 7mm, 8mm.
22) Stanley knife (utility knife)
23) Lube grease
24) Terminal screwdriver
25) Torque wrench drive range 12 - 68Nm (3/8” or W drive)
26) Vacuum cleaner
27) Wire stripper
28) Wiring mouse - approximately 6m 29) Bit/socket set- 2.5 - 10mm
(3/S” or W drive)
30) Anti Static Wrist Strap
31) 3/8” or W square drive sockets range 8 -19mm
32) 24mm socket
33) Ratchet 3/8” or W drive
34) ®30mm Hole Saw/Cone Cutter
TOOLS AND EQUIPMENT
To Next Page
Loading...
