THE INFINITY STAIRLIFT
Page 15
Engineer Instructions
Check the lift for any damage.
Check that all Parts and packages are on site.
Ensure that you have your installation guide book on site.
Inspect all parts are in full working order.
Only use original lift parts (this could potentially affect your
warranty).
Ensure all safety devices are fitted correctly, these may only be
removed if maintenance or repair is needed and only be serviced by
a qualified Engineer.
The Lift should not be used or left if the safety devices are not
functional or incomplete.
The safety devices must be checked regularly to see that everything
is in working order, if not these should be repaired immediately.
Use the device in accordance with intended use.
Ensure PPE is in place when necessary, i.e. shoes, safety glasses,
hard hat, gloves during the assembly and servicing of the Lift
Remember to hold spare parts and the correct tools in your van/
vehicle.
To Next Page
Loading...
