BestLife Hot Tubs M38S User Manual

100 pages

To Next Page

SPA OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

OM-BESTLIFE-23G

Questions and Answers:

A
Angelica GrantAug 14, 2025
How to fix jets that don't come on when pump key is pressed in my BestLife Hot Tubs M38S?
- S
  Sara CalhounAug 14, 2025
  If the jets in your BestLife Hot Tubs Hot Tub aren't working when you press the pump key, there are a few things to check: * First, make sure the jet pump is plugged into the spa pack. * Next, check the jet pump fuse in the spa pack and replace it if blown. * The jet pump might not be primed; shut off the spa to allow trapped air to escape, then restart it. If the problem persists, bleed air at the pump directly. * Also, ensure that the individually adjustable volume jets are not set to low volume and that the air control is open. * If the pump has overheated, wait for it to cool and listen for a 'snap' sound as the overload resets. * If none of these steps work, there may be a broken part inside the pump, in which case you should contact your dealer for service.
S
Stephen BeckAug 18, 2025
Why does the Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) shut off (not on initial start-up) in my BestLife Hot Tubs M38S?
- S
  shannon89Aug 19, 2025
  If the Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) shuts off in your BestLife Hot Tubs Hot Tub (not on initial start-up), it could be due to one or more pieces of equipment shorting to ground, or the total current draw exceeding the GFCI/RCD rating. Contact your dealer and DO NOT use the spa. Take measures to ensure others do not use spa.