Bestron AWK1000M - Page 25

25
EN
OPERATION - Overheating safeguard
The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it is operated
without (sufficient) water. Allow the jug kettle to cool down for at least 10 minutes before using it again.
CLEANING AND MAINTENANCE
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. Clean the jug with a damp cloth. Never immerse the appliance in water. Never put the appliance in a
dishwasher. Make sure that the electrical connections do not become damp.
3. If the interior of the jug has become severely discoloured, then the best way to clean it is with a damp
cloth and a little washing soda. After cleaning, rinse the jug very thoroughly.
WARNING:
• Neverusecorrosiveorscouringcleaningagentsorsharpobjects(suchasknivesorhardbrushes)to
clean the appliance.
• Beforecleaning,makesurethattheapplianceisnotconnectedtothepowersupplyandthatithas
cooled down.
CLEANING AND MAINTENANCE - Descaling
Lime will be deposited on the inside depending on the hardness of the water. For this reason the appliance
must be cleaned at regular intervals.
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. The jug kettle is fitted with a descaling filter. This filter must be removed for cleaning. Press the filter
inwardthroughthespout(7).Thefilterwillspringloose.Youcantakeitoutthroughthetopopeningby
turning the kettle upside down.
3. Fill the jug with a vinegar solution to the MAX level, and bring to the boil.
4. Leave the jug with the vinegar solution to stand for a couple of hours.
5. Empty the jug, fill with clean water to the MAX level, and bring to the boil. Empty the jug. Repeat this
process twice.
WARNING:
• Neveruseammoniaorotherproductstodescaletheappliance.Thesecanbeinjurioustoyourhealth.
Use solely a vinegar solution, or special descaling agents available from retailers.