EasyManua.ls Logo

Bestway POWER STEEL 56457 User Manual

Bestway POWER STEEL 56457
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
S-S-004975
www.bestwaycorp.com
Visit Bestway YouTube channel

Other manuals for Bestway POWER STEEL 56457

Question and Answer IconNeed help?

Do you have a question about the Bestway POWER STEEL 56457 and is the answer not in the manual?

Bestway POWER STEEL 56457 Specifications

General IconGeneral
FrameYes
ShapeRectangular
Capacity8124 L
MaterialPVC
Pool typeFramed pool
Assembly time30 min
CertificationCE, TÜV Rheinland
Product colorBlue, Grey
Frame materialSteel
Intrastat code95069990
Maximum flow rate2006 l/h
Maximum water level110 cm
Number of persons required for set up3 person(s)
Quantity per pallet2 pc(s)
Minimum order quantity1 pc(s)
Package typeBox
Package depth580 mm
Package width640 mm
Package height1370 mm
Package volume550000 cm³
Pump power85 W
Pump voltage220 - 240 V
Hose diameter32 mm
Water filter typeSand filter
Ladder step materialPlastic
Ladder frame materialMetal
Weight and Dimensions IconWeight and Dimensions
Depth4620 mm
Width2540 mm
Height1220 mm
Weight80450 g
Inner depth4120 mm
Inner width2010 mm

Summary

Pool Floor Preparation

Smooth out the bottom

Gently smooth out wrinkles in the pool floor once slightly covered with water, starting from the center.

Pool Placement Surface Requirements

Avoid soft lawn assembly

Do not assemble on soft lawn; use timber boards under vertical supports if the surface is soft to spread the load.

Safety Warnings and Guidelines

Non Swimmers safety

Continuous, active supervision of weak swimmers and non-swimmers by a competent adult is required.

Safety devices

Secure pool access with a protection device to prevent drowning and unauthorized access.

Safety equipment

Keep rescue equipment like a ring buoy and a working phone with emergency numbers near the pool.

Safe use of the pool

Encourage swimming, learn CPR, never dive in shallow water, and avoid alcohol/medication use.

Components List

Pool Location and Setup

Choose the correct location

Select a completely flat, level surface cleared of debris and away from climbing hazards.

Correct conditions to set up the pool

Ensure the location uniformly supports weight, is flat, cleared of objects, and near drainage.

Incorrect conditions to set up the pool

Avoid uneven ground, overhead power lines, trees, underground utilities, driveways, decks, gravel, or asphalt.

Installation

Assemble without tools, check parts, expose pool to sunlight for flexibility, and position near drainage.

Pool Maintenance and Care

Connection Valve Assembly

Instructions for assembling the connection valve and disassembling the debris screen for cleaning kits.

Pool Maintenance

Maintain water quality, use chemicals, clean liner regularly, run filtration system daily, and check filter cartridge.

Filling Pool with Water

Fill to 90% capacity, ensure the pool is level, and check for leaks before adding chemicals.

Repair

Check for leaks at valves or seams and use the provided patch for any evident water loss.

Dismantling

Steps to drain the pool by connecting a hose to the drain valve and removing components safely.

Storage and Winterization

Clean and dry all parts, sprinkle with talcum powder, fold carefully, and store in a dry place.

Limited BESTWAY® Manufacturer's Warranty

Related product manuals