Better Homes and Gardens BH46-084-899-02 User Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2016-05-05 Rev. 0001-A Factory: KONRIC
Steele TV Stand
Stock # BH46-084-899-02
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
LOT NUMBER:
DATE PURCHASE
D
:
/
/

Better Homes and Gardens BH46-084-899-02 Specifications

General

Brand	Better Homes and Gardens
Model	BH46-084-899-02
Category	Indoor Furnishing
Language	English

Summary

Maximum Recommended Weight Loads

Weight Capacity and TV Placement Warning

Details weight limits for TVs and equipment and warns against improper placement for stability.

Assembly System Operation

Cam Lock System Explained

Step-by-step guide on operating the cam lock system for panel connections.

Knock Down (KD) Assembly Method

Parts and Hardware Identification

Furniture Components List

Identifies all major furniture panels and parts (A-R) with quantities required for assembly.

Hardware and Fasteners List

Lists all hardware items (1-19) and their quantities, including screws, dowels, and locks.

Drawer Assembly

Assemble Drawer Back and Side Panels

Steps 1-3 detail attaching drawer back panel to side panels using dowels and screws.

Insert Drawer Bottom Panel into Grooves

Step 4 shows sliding the drawer bottom panel into the grooves of the side panels.

Attach Drawer Bottom Support Panel

Step 5 explains how to glue a dowel to the bottom support and attach it to the drawer back panel.

Connect Drawer Front and Side Panels

Steps 6-7 cover attaching the drawer front panel using cam bolts, dowels, and cam locks.

Secure Drawer Back Panel to Support

Main Unit Assembly

Construct Base Frame with Stretchers

Attach Triangle Metal Plates to Base

Install Adjustable Floor Levelers

Connect Bottom Panel to Assembled Base

Install Cam Bolts on Bottom Panel

Install Cam Bolts on Top Panel

Attach Vertical and Partition Panels

Tighten Hardware and Attach Back Panels

Door Installation and Adjustment

Mount and Adjust Doors

Safety and Final Positioning

Position Unit and Attach Anti-Tipping Hardware

Step 32 guides positioning the unit against a wall and attaching anti-tipping restraints for safety.