User guide / VRT 30 - VRT 30 NITROX - VRT 30 “Cold type”36 >
EUROPEAN STANDARDS.
All BEUCHAT regulators meet the Eur opean standard EN
250 - 2000 (Air) or EN 13949-2004 (Nitr ox).
1 - VRT 30 SPECIFICATIONS
Yoke 230 bars - 3300 psi (Réf. : 316 720)
DIN 230 bars - 3300 psi (Réf. : 316 721)
VRT 30 NITROX SPECIFICATIONS
EN 144-3
M26X2
230 bars - 3300 psi (Réf. : 316 722)
VRT 30 “Cold type” SPECIFICATIONS
Yoke 230 bars - 3300 psi (Réf. : 316 724)
DIN 230 bars - 3300 psi (Réf. : 316 725)
VRT30 “Cold type” is certified “Cold water”.
VRT 30 Octopus “Cold type” SPECIFICATIONS
Yoke 230 bars - 3300 psi (Réf. : 316 726)
DIN 230 bars - 3300 psi (Réf. : 316 727)
VRT30 Octopus “Cold type” is certified “Cold water”.
The VRT 30 regulators are two stages r egulators : the V30
piston first stage and the VR T balanced second stage with
Venturi adjustment (Dive mode).
A > V30 FIRST STAGE
The V30 first stage with a standar d piston will lower the
high pressure air from your tank to r elative of 9,6 bars /
145 psi. The VR T second stage is connected with a low
pressure hose using one of the four port holes on the first
stage (Standard UNF 3/8" fitting).
B > VRT second stage.
The VRT second stage is a pneumatically balanced second
stage, witch offers optimum ease of br eathing. An addi-
tional adjustment allow the diver to fine tune the Venturi
effect to the dive / diver conditions. The second stage
comes from factory with adjustment V enturi lever in the
minus position.
VRT 30 - VRT 30 NITROX Technical specifications
To Next Page
Loading...
