avoid freezing incidence.
5. During the dive : do not purge unnecessary demands
on your regulator, i.e. avoid using all at once the r egula-
tor, the octopus, the BC power inflator and the dry-suit
valve. do not purge the regulator unless required.
6. If the regulator were to freeze up accidentally and the-
refore free flow, switch to your second br eathing system
and abort the dive.
WARNING : Cold water diving r equires special equip-
ment and training. Failure to follow the above instructions
and recommendations can r esult in serious injury or
death. Certified instruction should be r eceived and com-
pleted for cold water and ice diving fr om a certified ins-
tructor by a r ecognized training agency prior to attemp-
ting any cold water or ice diving.
3 - NITROX USE
• The use of NITROX regulator requests a specific
“NITROX Diver” training.
• NITROX regulator must be fitted on NITROX tank with
M26x2 connexion (EN144-3 Standard).
• Check the pourcentage value of your NITROX mix and
conduct your dive with its max depth r estriction.
• The BEUCHAT NITROX regulators are compatible with
Oxygen 100% (i.e. for 3m and 6m deco stops use).
• NITROX markings and colors (Y ellow and Gr een) are
specific identifying elements of a NITROX regulator.
• Have an annual maintenance session for your NITROX
regulator by a NITROX certified BEUCHAT dealer.
• Only use BEUCHAT NITROX spare parts for the mainte-
nance of NITROX regulator.
• Always protect your NITROX regulator first stage with
the attached special plug to pr event any contamination
(grease, particules, dust, ...).
User guide / VRT 30 - VRT 30 NITROX - VRT 30 “Cold type”38 >
To Next Page
Loading...
