Beverage-Air MT Series User Manual

User Manual for MT Refrigerators and Freezers Beverage-Air
Rev. 10/22 Beverage-Air 9
• Do not place objects or appliances on top of this equipment. The cabinet is constructed of laminate and polyethylene
foam that may bend or deform when hit or stressed.
• For proper operation, equipment must have a minimum distance of 4" (10 cm) from walls and other structures on the
top, the back, and both sides.
• Avoid installing this cooler in direct sunlight.
• Do not install this cooler outdoors.
• This cooler must not be used or stored where ambient temperature is under 14°F or greater than 140°F or where
relative humidity is greater than 75%.
• Never install equipment close to heat sources to avoid excessive energy consumption or equipment malfunction.
• Do not introduce products into the equipment that are warmer than the ambient temerature. Do not install close to
heat sources, otherwise, this may cause an ineecient cooler operation and will increase energy consumption.
• Do not place items in front of grille. This could obstruct air ow causing the product to operate ineciently and
increase energy consumption.
• Do not place objects or appliances on top of this equipment. The cabinet is constructed of laminate and polyethylene
foam that may end or deform when hit or stressed.
• For proper operation, equipment must have a minimum distance of 4" (10 cm) from walls and other structures in the
back and on both sides.

Beverage-Air MT Series Specifications

General

Brand	Beverage-Air
Model	MT Series
Category	Commercial Food Equipment
Language	English