EN
Mobile air cooling fan and humidier - with LED
Product description
As summer approaches, we will do our best to have a pleasant, livable temperature in our apartment. Easily increase your comfort
with this designer, modern-looking, air cooler with wheels. No visible, rotating blades, the fan can be operated safely (even near
small children). A 6-color built-in LED lighting illuminates the fan circuit part futuristically in the dark, further enhancing safe use
even at night.
Just ll the tank with cold water, add ice or put an ice pack in the tank and connect it to a wall socket, and you can already enjoy
the cooling breeze. The device (by natural evaporation of water) is also able to increase the humidity of the air, thus preventing
unhealthy low humidity. You do not need to get up from your chair to control the device, you can easily set the desired function
with the help of the included remote control.
• Hidden blades • High capacity water tank • Included remote control and ice packs
• Built-in color LED • Easy to remove and clean lter • It can even be used with ice or ice batteries
• Touch button control • Night mode • Oscillation function (circular)
• Instant cooling airow • Timer • Easy to move thanks to the wheels
• Cools and humidies at the same time • 3 blowing mode • Easy to use
Power source: AC 220 - 240 V, ~ 50/60 Hz
Power: 90 W
Light source: LED
LED color: Red, megenta, yellow, green, blue, white
Fan: 3 adjustable stages, input air ow (max 6.5 m/s)
Air ow: 350 m³ / hour
tank size: 3.5 l
Remote battery: CR2025 - 3 V
Cable length: 150 cm
Size: 320 x 227 x 780 mm
Material: Plastic
Color: White
Protection: IP20
First steps
Attach the 4 wheels to the bottom of the fan in one motion. Place the fan on a horizontal, stable, dry surface. Make sure that
the appliance cannot roll away. Fill the appliance tank with water. If possible, use softened tap water or distilled water to avoid
possible limescale formation.) The mains plug of the appliance must only be connected to a socket with a compatible voltage
level. Connect the device and turn it on with the ON / O touch button on the front.
Ice pack rell: The package includes 2 ice packs. Before rst use, the cap should be removed and lled with tap water. Make sure
that the icing crystals in the ice pack do not scatter. Ice packs may only be lled with water up to the „MAX” mark. N do not use
other liquids! After lling, tighten the cap rmly onto the ice pack bottle!
You can also use the appliance as a conventional fan by pressing the power button on the top of the device, the fan operates
with low air ow. You can switch o the device by pressing the button again. The „Speed” button on the front of the device allows
you to switch between the 3 blow speed.
The device also has a pleasant cooling and humidifying function if the built-in tank is lled with cold water. The water
tank cannot be removed from the appliance!
To Next Page
Loading...