A 2 – Operation
20
8. How to Mount the Headphone Stand
The A 2 headphone amplifier is supplied with a headphone stand for storing the headphone. You can mount this stand
to the A 2.
• Put the device upside down on a soft pad to the very front on the edge of a table.
•
Make sure that the holes of the headphone stand match the holes of the A 2 headphone amplifier. Refer to the
d
rawing below.
•
Attach the headphone stand with the supplied Allen screws. Tighten the Allen screws by turning the Allen key
clockwise.
To Next Page
Loading...
