Beyerdynamic SPACE - Page 3

beyerdynamic SPACE 3
1. Introduction
In accordance with the Electrical and Electronic
Equipment Act (ElektroG) and the European WEEE
Directive 2012/19/EU, electrical and electronic
equipment mu be disposed of separately from
household wae at the end of their life.
If the device is operated with batteries , these mu
be removed from the device before disposal. If
batteries are permanently inalled in the device,
they mu be removed by professional a for
safety reasons.
These disassembly inructions show how to
proceed.
2. Information for Germany on disposal
in accordance with the Electrical and
Electronic Equipment Act (ElektroG)
and the WEEE Directive 2012/19/EU
u The symbol of the crossed-out dubin on the
product, in the operating inructions or on the
packaging means that electrical and electronic
devices mu be disposed of separately from
household wae at the end of their life cycle.
u Always dispose of used equipment in
accordance with applicable regulations.
u For the return of old equipment, batteries and
rechargeable batteries, there are free collection
points or a free return to beyerdynamic, as well
as other acceptance points for reuse. The
addresses are available at the local city or
municipal adminiration.
u Dealers for electronic equipment are generally
obliged to take back wae electrical/electronic
equipment free of charge. This obligation also
applies to sales via remote communication.
u For fuher information, please contact the
local authorities or the dealer from whom the
product was purchased.
u The consumer/end-user is responsible for the
deletion of personal data on the wae
electrical/electronic equipment.
3. Disposal of batteries
u Dispose of batteries separately aer use from
the product in accordance with applicable
regulations. They mu not be disposed of in
household wae. The return is free of charge
for consumers/end users.
u Before disposal, discharge and remove the
batteries.
4. Removing the battery
u Caution:
Before removal discharge the battery. For
this product a non-deructive removal of
the battery by the end user is not possible.
Due to the safety risk, this activity may only
be carried out by professional a.
Please contact beyerdynamic or consult
independent professional a.
u Discharge the battery
before disposal.
u Inse a flat, blunt knife
in the middle of the
speakerphone and
remove the housing
cover according to the
direction of the arrow..
u Remove the housing
cover.
u Loosen the screws of
the middle housing plate
with an appropriate
screwdriver 1 and
remove the plate 2.
u Cut the cable and
remove the battery.