Need help?Do you have a question about the BFT LEM 7 and is the answer not in the manual?
Details on power supply, motor power, absorption, RPM, sliding speed, and pinion pitch.
Information on gate capacity, unit weight, daily maneuvers, and IP protection rating.
Instructions for preparing and anchoring the mounting plate using concrete.
Steps for installing the reduction unit onto the anchoring plate with shims.
Guidance on welding the rack to the gate and aligning it with the pinion.
Adjusting the pinion for correct mesh and play with the gate rack.
Attaching and positioning limit switches for open/close stops.
Overview of the electrical system, including main switch, fuse, and blinker.
Specific wiring instructions for motor, limit switches, and grounding.
Procedure for adjusting the safety clutch's operating force.
How to manually operate the gate using the release key.
Steps to diagnose issues like motor direction or limit switch function.
Identifying faults in photocells, pneumatic skirt, radio receiver, or pushbutton.
To Next Page
General