BFT URANO BT User Manual

ISTRUZIONI D’USO E DI INSTALLAZIONE
INSTALLATION AND USER’S MANUAL
INSTRUCTIONS D’UTILISATION ET D’INSTALLATION
INSTALLATIONS-UND GEBRAUCHSANLEITUNG
INSTRUCCIONES DE USO Y DE INSTALACION
INSTRUÇÕES DE USO E DE INSTALAÇÃO
D811431 ver. 05 15 -02-07
Via Lago di Vico, 44
36015 Schio (VI)
Tel.naz. 0445 696511
Tel.int. +39 0445 696533
Fax 0445 696522
Internet: www.bft.it
E-mail: sales@bft.it
URANO BT
I
GB
F
D
E
P
ATTUATORE PER CANCELLI SCORREVOLI A CREMAGLIERA
ACTUATOR FOR RACK SLIDING GATES
ACTIONNEUR POUR PORTAILS COULISSANTS A CREMAILLERE
ANTRIEB FÜR ZAHNSTANGEN-SCHIEBETORE
SERVOMOTOR PARA CANCELAS CORREDERAS DE CREMALLERA
ACCIONADOR PARA PORTÖES DE CORRER A CREMALLERA
8
027908 2 4 8 7 9 4

BFT URANO BT Specifications

General

Brand	BFT
Model	URANO BT
Category	Controller
Language	English

Summary

URANO BT User Manual

User Manual Safety Warnings

Important safety instructions and precautions for operating the URANO BT actuator.

User Manual Safety Guidelines

Essential safety rules and behavioral guidelines to avoid accidental problems.

User Manual Manual Release Procedure

Instructions on how to activate the emergency manual release for gate operation.

Installation Manual - Initial Sections

Installation Manual Safety Precautions

Critical safety warnings and precautions for the installation process.

Installation Manual Technical Data

Detailed technical specifications, power supply, and performance data.

Installation Manual Pre-Installation Checks

Gearmotor and Rack Installation

Gearmotor Fixing and Adjustment

Rack Fitting and Types

Pinion and Rack Adjustment

Limiting Devices and Electrical Setup

Electromechanical Limiting Devices Setup

Electrical Installation Setup

Instructions for setting up the electrical connections and safety devices.

Terminal Connections

Terminal Connections Guide

Detailed guide for connecting various components to the control unit terminals.

Safety Device Connections

Specific instructions for connecting photocells and other safety devices.

Control Unit Programming

Control Unit Programming

Overview of control unit programming methods and parameters.

Configuration - Parameters Menu

Parameters Menu Settings

Configuration - Logic and Radio Menus

Logic Menu Options

Radio Menu Functions

Configuration - Language, Default, Diagnostics, Autoset

Diagnostics and Monitoring Features

Autoset Menu for Torque Adjustment

Automatic adjustment of motor torque and slow-down parameters.

Operation and Maintenance Procedures

Manual Release Procedures

Detailed steps for manual gate release and resetting the automation.

Automation System Checks

Routine Maintenance Procedures

System End-of-Life and Warnings

Installation Manual Warnings

Important warnings regarding proper installation and adherence to standards.