Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 W
ermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@
bgs-technic.de
www.bgstechnic.com
Operation
Before first Use
Remove the trouble code reader from the packaging and dispose off packaging
material. Plastic bags etc. may become a deadly toy for children.
Make sure the vehicle is OBD II compliant and has 16-pin DLC (Data Link
Connector). The Vehicle Emission Control Information Label (VECI label) must
state that the vehicle is OBD II compliant.
To determine where the DLC is situated, read the vehicle’s owner manual, ask
your car repair shop or surf the internet.
DTC Example:
P 0 2 0 2
IdentifyingSpecific
Malfunctioning
Sub-systems
1=Fuel and Air Metering
2=Fuel and Air Metering
3=Ignition System or Engine Misfire
4=Auxiliary Emission Controls
5=Vehicle Speed Control and Idle
Controls
6=Computer Output Circuits
7=Transmission/Hydraulic Sensors
8=Transmission/Hydraulic Pressure
9=Automatic Transmission
System
B=Body
C=Chassis
P=Powertrain
U=Network
Code Type
0=Generic
1=Manufacturer
Specific
To Next Page
Loading...
Need help?
General