Bialetti MCF01 - Page 29

EN
29
8. Problems/causes/solutions
Problem found Possible cause Solution
The appliance does not
work.
Plug not inserted.
Check proper inser-
tion of the plug or in-
sert it into a di erent
power socket.
The lid was not insert-
ed properly.
Follow the instructions
in this manual.
The voltage required
for the appliance does
not correspond to the
available mains volt-
age.
Check the mains volt-
age with the values
required for the appli-
ance.
The co ee powder
blocks the motor.
After each use, clean
thoroughly the motor
unit container.
Rotate the blades for
a complete turn using
a wooden tool (e.g.
spoon).
The appliance does not
grind properly.
Use a material other
than co ee.
Follow the instructions
in this manual.
Too many co ee
beans were inserted.
Do not exceed the
amount indicated in
this manual.
The co ee beans are
damp or badly pre-
served.
Use dry co ee beans,
free from moisture,
within the expiry date
indicated on the prod-
uct.
Possible faulty blades.
Bring the appliance
to the nearest service
centre Bialetti.
The appliance vibrates
and generates noise.
The appliance is not
placed on a stable
surface.
Position the appliance
on a stable surface.
Put it on a rubber mat
to reduce vibrations
and noise.
The noise is normal, as
the appliance is break-
ing and grinding dry
co ee beans.