Biddle Forceflow 900 Series - Changing Unit Handing (Steps 10-18); Changing Coil Handing; Re-attaching Fan Deck; Changing Electrics Box Handing

Clip T4 thermostat on
return bends of coil.
Coil is attached to back
plate using 4x M6 nuts.
Coil can be plumbed in at this stage.
10 Changing Coil Handing 11 Re-attaching Fan Deck 12 Changing Electrics Box Handing
13 Re-attaching Electrics Box 14 Re-attaching Coil 15 Re-attaching Blanking Plates
16 Re-attaching Filter 17 Re-attaching Top Panel 18 Re-attaching Access Panel
Changing the Unit Handing
Steps 10 - 18