A: Power
Turn on it,the machine will be under the working,the drum will move ,and the
exhaust motor too.
B: Cooling
Turn on the stirring arms will start to stir.
C: Timer
Turn on it,it will start computing time until reach the setting time,the buzzer will
ding ding ding ~~
D: Roasting time
Press the setting key,using shift key and ascending key to preset roasting
time ,press the setting key again, the setting is done.The roasting time will be zero
after pressing the RST .
E: Roasting temperature
Showing the temperature in the drum,it will automatically stop supplying gas
when the temperature reaches setting one,when the temperature reduce 10c,the
machine will supply the gas and fire automatically.
Pressing shift key, down key and up key can set the temperature.
(NOTE:In genera,please do not use the Mode Key,due to the machine has set the
proper parameter .)
F: Hot blast temperature
Showing the hot air temperature before the hot air into the drum.Setting it will
not influence the machine to work.
G: Ignition
Press to turn on “igniter”,and after 5’ ,
electromagnetic valve will connect the gas supply to fire ,and the indicator light
will be lighted.
Press to turn off “stop”,the electromagnetic valve will stop connecting the gas
supply and extinguish, the indicator light will turn off .If firing is unusual , the
igniter buzzer will ding ding ~~.
H:Drum Motor Switch
Turn on it ,then the Drum moves
I:Exhaust Motor Switch
Turn on it ,then the Exhaust Motor works
P15
To Next Page
Loading...