（4）Roasting operation
1.Making sure the machine is clean and under the normal situation.Turn on
the main power (back of the electric cabinet)
2.Setting the highest roasting temperature on the roasting
thermometer,and the roasting time
(Note:If all of the setting is done when you received machine,and that
setting meets your request on roasting,then no need to do these
steps before every starting on.)
3.Turn on the “operation” switch
Turn on the “start “switch to preheating
(NOTE:”Start”switch Can Not be turn on if the operation switch don’t
be turned on firstly.Or the Drum will be deformed,and the residual
gas will cause the potential danger.)
4.Adjust the exhaust flow at 5 or 6 scale,turn up the power,during the
temperature up to 180℃-190℃,preheating within15-20 minutes,turn
down the power,when the temperature down to 150℃,then start to
roast.
P17
To Next Page
Loading...