Bieffe BF091 - Page 37

37
ASSE NELLA MANICA and JOLLY IRONING BOARD
ENGLISH
9. INSTALLATION AND USE BF006
9.1 INSTALLATION
ATTENTION: read and follow carefully all the safety instrucons previusly reported, pay at-
tenon to the instrucons about the electrical system to which the appliance is connected.
1. Open the ironing board and posion the adjustable leg (1) according to the required height.
Place the board on a at and stable oor.
2. Use the support (2) for a steam generator or clothes.
3. When present, install the opon sleeve board (8). In case of a heated sleeve board, connect
the plug to the outlet to the plus on the ironin board (7).
4. Connect the power cable (3) to an outlet.
5. Acvate the main switch (4).
9.2 USE
ATTENTION: ENSURE THAT THE ELECTRICAL SYSTEM IS EQUIPPED WITH A DIFFERENTIAL SWI-
TCH (LIFE-SAVING SYSTEM) AND WITH A PROTECTIVE CONDUCTOR (GROUNDING SYSTEM).
1. Set the thermostat (5) as needed (the ideal temperature 50/70 °C).
2. Aendere circa 10 minu per raggiungere la temperatura selezionata.
3. Premere il pedale (6) per aspirare.
4. Wait 10 minutes to reach the selected temperature.
5. Press the pedal (6) to vacuum.
6. To avoid condensaon inside the table, only iron when the ironing board is hot and act on
the vacuum pedal each me steam is used.
7. Do not leave temperature sensive objects on the board.
At the end of the job, turn o all the switches and unplug the machine from the outlet. It is not necessary to
empty the boiler. Empty the boiler at least once a month.