Bi g Di pp er
R
Big Dipper Laser Science And Technology Co., Ltd
LED Par Light User's Manual
Model:LP001
Attention
Safety Tips
1.Please read these operating instructions carefully to familiarize you with basic operations of this unit
BEFORE USE.
2.Without permitted, it is prohibited to spread the contents of this manual to others.
3.This manual is only to provide related information, and the contents of this manual will be changed at
any time without notice.
4.Unless the instructions have already stated, please do not freely modified the unit.
Operating Instructions
1. Before installation and maintenance, please confirm the power is OFF. make sure that the ventilation
around the unit is good.
2.The lighting is designed for indoor demonstration, please do not use this product in a wet environment
for long-term.
3.The use and maintenance of this unit should avoid contact with water. when using it outdoor, please take
waterproofing measures.
4.Personnel, who to take the installation, operation and maintenance, must be familiar with the lighting
performance. Most of the damage is resulted from unfamiliar with its performance.
5.Please do not face up to the luminous unit for a long time, so as not to cause discomfort to your eyes.
6.Please often wipe the unit with a clean cloth.
Safety guide
Light source
Source lifetime
Power supply
Rating power
Play mode
DMX channel
Effect
Dimensions
N.W.
3X54W/ R G 18B 6W
Rated 100,000 hours
100-240V/50-60HZ
180W
Auto/Sound/DMX/Master-slave
8
Color change,Strobe
255×255×365mm
2.8KG
12 18
Safety guide
Safety guide
DMX Control
Menu operation
Operation Instructions
Master slave mode: connect by DMX cable, D001 mode is slave light while the first light is master one.
Numerical
1-99
1-99
MENU
CC
CP
DE
BEBE
R001-255
G001-255
B001-255
W001-255
D001-D512
（Last radix point flickers on digital display board when has DMX signal）
Channels
1-255
1-255
0-10
11-50
51-100
101-150
151-200
201-255
1-255
0
1-255
0
1-255
0
1-255
0
1-255
Numerical
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
Function
R、G、B or mixed color brightness control
Strobe flash, speed adjustable.
Select colors by manual
Colors transition automatically
Colors shade automatically
Colors pulse transform automatically
Sound mode
Select colors when CH3 at 11-50
Red light off
Red brightness from dark to bright
Green light off
Green brightness from dark to bright
Blue light off
Blue brightness from dark to bright)
White light off
White brightness from dark to bright)
(This channel should use
together with CH5, CH6 , Ch7orCH8 )
(This channel should use together
with CH5, CH6 , Ch7orCH8 )
All light off
Description
Colors transition, change speed by UP and Down
Colors shade, change speed by UP and Down
Auto-play mode,change speed by UP and Down
Sound control mode
Red color brightness setting, change brightness by UP and Down
Green color brightness setting, change brightness by UP and Down
Blue color brightness setting, change brightness by UP and Down
White color brightness setting, change brightness by UP and Down
DMX mode, change numerical value by UP and Down
Note: "MENU" is the Function Transforming Button, "UP & Down" is the No. Transforming Button,
"ENTER" is the Confirming Button.
Need help?
General
