10
Using the alarm
Setting alarm time
1. Slide
the AL1
/
AL2
/
AL1+2
switch
on
the
left
side
of
the
unit
to AL1
to
set
ALARM
1
time
or
to AL2
to set ALARM 2 time.
The display will show ALARM 1 or ALARM 2 according to your selection.
2. Slide
the BUZZER
/
AUTO
/ STANDBY
/
ON
switch
on
left
side
of
the
alarm
clock
radio
to BUZZER
or AUTO.
Refer to
“Waking to Buzzer, or Radio”
for details.
3.
Hold ALARM
SET
and
press HOUR
to
adjust
hour
or
press MINUTE
to
adjust
minutes
until
the
desired
alarm time is displayed for the selected alarm.
Checking alarm time
1. Slide the AL1 / AL2 / AL1+2 switch on the left side of the alarm clock radio to AL1 or AL2.
2. Hold down ALARM SET
to view selected alarm time.
Selecting alarm options
Slide
the
AL1
/
AL2
/
AL1+2
switch
on
the
left
side
of
the
unit
to
AL1
to
activate
ALARM
1,
AL2
to
activate ALARM 2 or AL1+2
to activate both alarms.
Notes:
•The
alarm
will
not
sound
if
the
BUZZER
/
AUTO
/ STANDBY
/
ON
switch
is
set
to
ON
or STANDBY.
•The
alarm
will
not
sound
when
the
clock
radio
is
disconnected
from
AC
power
and
powered
by
the
backup battery only.
Waking up to a buzzer alarm
1. Slide the BUZZER / AUTO / STANDBY / ON switch to BUZZER
for the buzzer alarm.
2. Set the alarm time. Refer to
“setting alarm time”
for details.
The alarm buzzer will sound at the preset alarm time.
Waking up to radio
1. Slide the BUZZER / AUTO / STANDBY / ON switch to AUTO.
2. Set the alarm time. Refer to
“setting alarm time”
for details.
3. Adjust the VOLUME
control to a setting loud enough to wake you up at the preset time.
The radio will turn on at the preset alarm time.
Stopping an alarm
Press ALARM
/
SLEEP
/ STANDBY
to
stop
the
buzzer,
or
radio
alarm.
The
alarm
will
sound
again
the
next
day
at the preset alarm time.
Deactivating alarms
Slide the BUZZER / AUTO / STANDBY / ON switch to STANDBY
to deactivate all alarms.
Snooze
When
the
alarm
sounds
at
the
preset
time,
press
SNOOZE
to
enter
snooze
mode.
The
alarm
will
sound
again after nine minutes.
To Next Page
Loading...