Do not activate the brakes until the bike is fully assembled. Squeezing brake levers while calipers
have no disc rotor between them can damage the brakes.
To Prepare
• We recommend that you familiarize yourself with the bike parts before assembling.
• Gather all the required tools. Be sure to work in a clean, dry space with plenty of room.
• You might wish to lay down a sheet of foam or an old blanket to protect the bike during assembly.
• You may find it helpful to stand the bike frame on a block or sturdy box under the battery housing to
work with it in an upright position.
• Watch the Bike’s balance when installing wheels.
Your Bike comes with:
To Next Page
Loading...