OpenVPN Client
OpenVPN client can help you dial-in the OpenVPN server to establish a trusted OpenVPN tunnel
over Internet.
Name: user-defined name for identification.
WAN Interface: Select the exact WAN interface configured as source for the tunnel. Select Default
to use the now-working WAN interface for the tunnel.
Username: Enter the username provided by your OpenVPN Server.
Password: Enter the password provided by your OpenVPN Server.
OpenVPN Server Address: Enter the WAN IP address of the OpenVPN server.
Protocol: The protocol, same as set in server side.
Port Number: 1194.
Cipher Encryption:
Be consistent with what set on server side.
HMAC Authentication:
Be consistent with what set on server side.
lzo Compression: Enable to use the
259H267H267H267H
LZO compression library to compress the data stream
Certificate Authority: Select your trusted CA from your server side to establish the trusted VPN
tunnel with server.
Click Add button to save your changes.
To Next Page
Loading...
Need help?
General
