EasyManua.ls Logo

Bimar CP092 - Troubleshooting and Warranty; Troubleshooting and Solutions

Bimar CP092
52 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Information for correct disposal of the product under the European Directive 2011/65/EU.
At the end of its lifetime, the product must not be disposed of with ordinary urban waste.
It can be consigned to the special waste recycling centres provided by local government, or by the
retailers who provide this service.
To avoid possible damages to the environment or human health due to the uncontrolled disposal of
waste, recycle the equipment in a responsible manner, promoting the sustainable reuse of material
resources, refrigerants and flammable insulating gases.
Proper disposal of a household appliance prevents possible detrimental effects on the environment
or health arising from its incorrect disposal and allows the recovery of its constituent materials,
generating major savings of energy and resources. The product bears the crossed-out symbol of a
wheeled rubbish bin to indicate that it must be disposed of separately. Illegal dumping of the product
by the user will be subject to prosecution under the relevant law.
TROUBLESHOOTING
FAULT
CAUSE
SOLUTION
Appliance does not
switch on
The appliance is not on.
Turn on the appliance.
The electrical socket is defective.
Seek advice from a qualified
professional.
The plug is not connected to the
socket.
Connect the plug to the power socket.
The appliance
only
works for a short time
Restriction in the drain
hose.
Position the drain hose correctly.
Drain hose obstructed.
Check for obstacles obstructing
the discharge of air outdoors.
Kinks in drain hose.
Remove the kinks.
The air-
conditioner
works but does
not cool the
room.
Window open
Close the window
There is a heat source (fan
heater, lamp, etc.) operating in
the room
Eliminate the heat source
The air discharge pipe has
become disconnected.
Fit the pipe in place.
Unpleasant smell
in room
Air filters fouled.
Clean and replace filters.
The symbol 'E1'
appears on the
display.
Room temperature sensor
anomalies.
Check the room temperature sensor
and the relative circuits.
The symbol 'E2'
appears on the
display.
Pipe sensor temperature
anomalies.
Check the pipe temperature sensor
and the relative circuits.

Related product manuals