Do not use means to accelerate the defrosting process or to
clean, other than those recommended by the manufacturer.
Do not use tools different from those recommended by the
manufacturer
when defrosting and cleaning the appliance.
If the appliance is installed, used or stored in a non-ventilated area, the
room
must be designed to prevent the accumulation of
refrigerant leaks with the consequent fire or explosion hazard due
to the refrigerant combustion caused by electrical heaters, stoves
or others sources of ignition.
Compliance with national gas regulations shall be observed.
Keep ventilation openings clear of obstruction.
The appliance shall be stored so as to prevent mechanical
damage from occurring.
Any person who is involved with working on or breaking into a
refrigerant circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorises their
competence to handle
refrigerants safely in accordance with an
industry recognised assessment
specification.
Servicing shall only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel shall be carried out under the
supervision of the person competent in the use of flammable
refrigerants.
Transport of equipment containing flammable refrigerants.
See transport
regulations.
Marking
of
equipment using signs.
See local
regulations.
To Next Page
Loading...
