22
For example:
with a room temperature of 15°C and set temperature of
25°C, the display shows up like this.
If the room temperature is lower than the temperature shown on the display the
appliance stays in stand-by.
Daily program: can be activated only if minutes,hours and day are already set.
1. Press the button to start the appliance.
2. Press the button to start the programmation, display turns on.
3. Press the button (d1 will appear on the display)
to set the right day (d1= Monday; d2= Tuesday;
d3=Wednesday; d4=Thursday; d5=Friday;
d6=Saturday; d7=Sunday).
For example “ d1 “is Monday.
4. Press the button, “P1” will appear on the screen for
the first daily program, if you press it again it will activate
another daily program (maximum 6 programs). For
example we have the first program (P1).
5. Press the button to select the starting time, “00”
appears on the display and every time the button is
pressed it adds one hour to the starting time.
6. Press the button to set the shut-down time, the
display shows the starting time, every time the button is
pressed it adds an hour to the shut-down time.
7. Set the temperature as explained in the previous chapter.
8. Repeat n.2 to n.7 to set the entire week, then press to confirm.
9. To stop the weekly program, press the button: the light next to “P” will shut
down, and the program is stopped. To restart the programmation press “P”
again.
To Next Page
Loading...
Need help?
General
