15
• Do not move the appliance when it is running.
• Do not allow the appliance to be exposed to the
weather (sun, rain, etc.).
• Should the appliance fail or not work correctly,
disconnect the power cord immediately. Check that it
is not damaged, and thereafter turn it back on: if in any
doubt, consult a qualified professional.
• Do not pull on the power cord or the appliance itself to
unplug the appliance from the plug point.
• Do not pull on the power cord to move the appliance.
• Do not use the appliance if it does not work properly or
if it appears damaged; when in doubt, contact a
qualified technician.
• Prevent the appliance from overheating; to ensure this,
periodically check the heating element, that the air inlet
and outlet are not blocked by anything (dust, fluff, or
similar materials). Should overheating occur, the built-
in safety device will stop the appliance from running. To
restore operation, remove the plug from the mains and
wait for it to cool (about 20-30 minutes) and insert the
plug into the plug point once again.
INSTALLATION
• After unpacking, check that all parts of the appliance are present; if in
doubt, do not use and contact a qualified technician. The packaging
materials (plastic bags, polystyrene, metal staples, etc.) must not be
left within reach of children, as they constitute possible sources of
danger. Warning: any tags / advertising labels attached to the knobs,
handles or power cord must be removed before using the appliance.
• Before connecting the appliance, check that the voltage on the data
plate matches that of the electric system. In the event of
incompatibility between the plug point and the appliance's plug, have
To Next Page
Loading...
Need help?
General
