Bimar HP131 - Page 22

22
2.5 On the next screen: click on “ ”.
2.6 “Wi-Fi set-up”: enter:
NAME
and
PASSWORD
of your Wi-Fi network, and click on the "Next"
symbol to activate the connection.
2.7 Wait for the device to
connect to the Wi-Fi
network and press the
word "Finish".
3
Configuration without Bluetooth
3.1 Follow the procedure in the previous paragraph 2.1. to turn on and reset the device.
3.2 Open the APP on your smartphone: on the first screen click on "ADD DEVICE" or optionally
click on " " at the top right and press the writing: " ".
3.3 In the next screen, click “ ”.
3.4
"Set up Wi-Fi": enter:
NAME
and
PASSWORD
your Wi-Fi network, and click on the “next”
symbol to activate the connection.
3.5
On the next screen: click on the writing “Confirm” to activate, then the LED will flash quickly;
after this press on the "Next" symbol.
3.6
The countdown will start: Scanning devices ⇒ Register the device on Cloud ⇒ Start the
device that stops when the connection between your device and the smartphone has occurred
⇒
End
.