- Always disconnect the appliance from the power point:
a. Before installation
b. When an operating fault is detected.
c. if you decide not to use the device for short or long periods
d. before cleaning the appliance
- The appliance must not be placed directly beneath a power point.
• The power point must be accessible so as to easily remove the plug
in case of an emergency.
• Do not use the appliance near a bathtub, a shower, swimming pool
or basin/sink, etc.
• If the power cord is damaged, it must be replaced by the
manufacturer, its technical assistance centre or a qualified person,
in order to prevent any risks.
• Do not pull on the power cord or the appliance itself to unplug the
appliance from the power point.
• Do not use this heating appliance with programmers, timers or with
any other device that automatically turns on the appliance, as this
could pose a fire risk should the appliance be covered or positioned
incorrectly.
• Check the condition of the appliance periodically. If there are any
faults or when in doubt, consult a qualified professional.
• The protection grid does not provide complete protection to
children or to people with reduced physical, sensory or mental
capability.
• Should the appliance fail or not work correctly, disconnect the
power cord immediately. Check that it is not damaged, and
thereafter turn it back on: if in doubt, consult a qualified
professional.
To Next Page
Loading...
