EasyManua.ls Logo

Bimar VI63 - Page 12

Bimar VI63
32 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12/32
- fabrics (curtains, etc.) or floating materials that could obstruct the air
intake grille; make sure that the front is free of floating materials (dust,
etc.).
The appliance must not be used in dusty environments or in the presence of
floating materials or used in a room where there is a fire risk.
Stand the appliance on a smooth, horizontal surface or table; do not place it on
a inclined surface (the appliance could fall over).
USE
Before each use, verify that the unit is in good condition, the electric cord is not
damaged, if the power cord is damaged, it must be replaced by the manufacturer
or a competent qualified electrician or a person with similar qualifications, in
order to avoid any risk.
Please put the appliance on a secure surface
and verify that the area around the surface is
clean, without dust.
The fan can be manually adjusted up and
down by the air grating and according to his
inclination
During transport and/or function, it is
possible for the side handle (1) to become
loose. To adjust unit to any angle tighten
these appropriately.
Press the switch 0, and insert the plug into the socket.
Press the speed desired with the switches:
1 minimum speed; 2” medium speed; 3maximum speed.
To switch off the appliance, press the switch “0”, and pull out the plug from the
socket.
When not in use for long periods, the plug must always be removed from the
socket.

Related product manuals