12/16
ASSEMBLY
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord
is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with
similar qualifications, in order to avoid any risk.
If in doubt, have the appliance checked or assembled by a qualified professional person. For assembly, refer
to figure.
Attention: always unplug the appliance before you assemble.
Attention: the fan can be used only when completely and correctly assembled, that is complete with its
Cross base with quick-fit feet and locking clip and protection grid.
1. Motor shaft
2. Oscillation button
3. Body
4. Pole attachment ring nut
5. Cover
6. Screw
7. Foot
8. Selectors
9. Fixed pole
10. Adjustable pole
11. Handle
12. Front grille
13. Fan attachment ring nut
14. Screw for the plastic ring
15. Grille attachment ring nut
16. Rear grille
17. Fan
To Next Page
Loading...
