1
Homesurf Tablet 7 – Quick Start Guide
For a full explanation of all the features and operating instructions, please refer to the User’s Guide.
1 Setting up your Homesurf Tablet
A. Connect and charge your Homesurf Tablet
1. Plug one end of the AC power adaptor to the power jack on your
Homesurf Tablet.
2. Plug the other end into a power outlet.
3. The charge LED turns red to indicate charging.
Note:
• Charge for at least 6 hours.
• It is normal for the device to build up heat while charging or after
using for an extended period of time.
B. Insert memory card
1. Insert the memory card into the card slot in the direction as
indicated above until it clicks into place.
Homesurf Tablet 7_QSG_EN.fm Page 1 Thursday, October 14, 2010 12:47 PM
To Next Page
Need help?
General