Binks 83C - Page 4

EN
SBBI-21-044-T (10/2015)4 / 8
83C-211 PRESSURE TANK WITH AGITATOR
1 PT-423 Tank Assy. Kit (Includes 1
Ref. Nos. 1A, 18, 19, 20 & 21)
1A PT-420 Tank Shell 1
2 PT-33-1 Lid Gasket, Santoprene 1
3 PT-425 Lid, Zinc Plated (Agitator) 1
4 PT-418 Air Motor/Adapter Assy.
(See Pg. 5 for Breakdown)
*5 ---- Street Elbow 1/4" NPT (F) 1
x 1/4" NPT (M)
n 6 H-2008 Nipple 1/4" NPT(M) (83C-210 & 83C-220) 2
x 1/4"NPS(M) (83C-211 & 83C-221) 3
7 HA-57011 Hose Assembly 1
8 HAV-500 Air Adjusting Valve1/4" NPS (F) 1
x 1/4" NPS (M)
n 9 83-2727 Gauge (83C-210, 83C-211) 1
Gauge (83C-220, 83C-221) 2
n*9A ---- Pipe Plug 1/4" NPT(M)(Supplied/Reg) 1
n 10 HAR-511 Regulator (All regulated models) 1
n 10A HAR-507 Regulator (83C-220 & 83C-221) 1
11 SSP-30-ZN 90° Swivel Adapter 1/4" NPS (F) 1
x 1/4" NPT (M)
*12 ---- Cross 1/4" NPT (F) 1
13 TIA-5080 Safety Valve - 80 PSI 1
14 PT-32 Handle 1
*15 ---- Hex Nut 3/8"-16 1
16 AD-11 Nipple 3/8" NPT (M) 1
x 3/8" NPT (M) S.S.
*17 SSP-1939 Street Elbow 3/8" NPT (F) 1
x 3/8" NPT (M) S.S.
18 ---- Thumb Screw 4
19 ---- Yoke Assembly 4
20 ---- Cotter Pin, 3/32 x 1" 4
21 ---- Hinge Pin 4
22 PT-31 Fluid Tube, Galv. 1
23 PT-78-K10 or Tank Liner (Kit of 10 or 60) 1
PT-78-K60
24 PT-426 Lid, Zinc Plated 1
25 SSP-462-ZN Hex Nipple 1/4" NPT(M) 1
26 SS-2707 Air Relief Valve 1
n 27 83-4233 D. M. Nipple (Universal Pipe Thread)
(83C-210, 83C-211) 2
(83C-220, 83C-221) 3
63 KK-5057 Clamp, Pin & Screw Kit (Includes
1 Ea. Ref. Nos. 18, 19, 20 & 21) 1
65 KK-5076 Safety Valve & Drain Valve Kit
(Includes 1 Ea. Ref. Nos. 13 & 26) 1
66 85-451 Air Control Assembly for 83C-210
85-452 Air Control Assembly for 83C-211
85-453 Air Control Assembly for 83C-220
85-454 Air Control Assembly for 83C-221
Ref. Replacement Description Individual
No. Part No. Parts Req.
* Purchase locally.
Suffixes -K2, K5, K10 designate kits of multiple parts.
n Items included within Air Control Assembly (Item 66)
83C-210 PRESSURE TANK
(Includes Ref. No. 1, 2 and 18 thru 23)
9
11
Air In
27
24
10
15
12
13
16
17
6
Air to
Spray
Gun
83C-220 &
83C-221
PRESSURE TANK
(Dual Regulation
included with these
models)
Air In
6
22
23
3
2
27
11
10
13
15
14
17
16
18
9
6
27
9
Fluid Out
19
21
4
5
6
7
27
Air to
Spray
Gun
Fluid Out
14
20
25
26
26
25
7
6
27
1A
63
10A
8
9A
9A
12
65
1
Grounding Diagram
Purchase hardware locally
5/16–18 x 3/4 Long
Hex Head Bolt
(1 Required)
2X
5/16–18 Hex Head
Nut (2 Required)
Sufficient Length
12 Gauge Wire
(Not Shown)
5/16 Lock Washer
(1 Required)
Tank Skirt (Ref)
66
66
66