Lead Acid Manual
For in depth information on how to perform each routine maintenance on your batteries, visit Lead Acid
Manual
Lead Acid Resources
Warranty Claims: Contact Continental Battery Systems Customer Experience (844) 935-1186 for any
warranty questions/claims.
For additional questions and customer support, please contact your local dealer or Bintelli manufacturer.
Cleaning
Batteries can attract dust, dirt, and grime. Keeping them clean will help you spot signs of trouble if they
appear, and avoid problems associated with grime.
Checking the terminal and nuts
The connection of the battery should always be kept in good condition. Please check every week whether
any battery cable terminals or nuts have become loose in order to prevent any spark or damage to
terminals. Check the battery cables for damages weekly, and replace any damaged battery cables
immediately.
Do not place any objects on the battery and do not connect the positive pole to the negative pole. This
may cause a short circuit, or dangerous spark or may cause damage to the battery or the user.
Recharging
Important for monitoring accurate battery data. Download the Lester app and follow the prompts to see
the state of charge your batteries are reading and any other charging inquiries.
● Lester Electrical ChargerConnect™ App User’s Guide
● The battery should be recharged daily AND after the vehicle is used. Any delay in the
recharging will have a negative effect on the battery. Lead-acid batteries do not have a
memory and therefore do not need to be fully discharged before recharging.
● Always keep the cart on charge unless specified in the charging link.
● Only use a dedicated 20 amp circuit when charging the batteries.
● If using an extension cord, make sure it’s a 10/12 gauge only. No more than 25 ft.
Curtis Meter
Another way to check lead acid battery charge is with the Curtis Meter.
This resource is located on your dash, to the left of the steering wheel.
Although this does not give you an exact percentage reading as the
lester app does, it allows you to monitor the vehicle's current state of
charge.
To Next Page
Loading...